Beebeecraft Tutorials on How to Make a Pair of Glass Beaded Cross Earrings

This Beebeecraft tutorial is about how to make a pair of glass beaded cross earrings. Follow the steps below and have a try.

This is a pair of earrings with beaded cross design. I pick some red and blue glass beads, plus some gold bead spacers to make them. As you can see from the picture, the supplies are simple. Now check my steps below to see how to make this pair of beaded cross earrings.

Jewelry craft supplies in making the glass beaded cross earrings:

6mm Red Faceted Crystal Glass Beads

6mm Blue Faceted Crystal Glass Beads

3mm Gold Bead Spacers

0.38mm Jewelry String

Jump Rings

Silver Earring Hooks

Long Nose Plier

Scissors

Instructions on making the glass beaded cross earrings:

Step1：Bead a clover pattern

1^st, snip off a piece of 0.38mm tiger wire (about 50cm), thread it through 5 3mm gold bead spacers and a 6mm red faceted glass bead;

2^nd, thread the left wire through the red glass bead and tighten;

3^rd, slide a red glass bead and 5 gold spacers to the right wire, then thread the wire through red glass bead you just slide;

4^th, repeat this procedure and make 2 more patterns, and it finally ends up like what is shown in the picture.

Step 2: Add cross patterns

1^st, slide 4 gold spacers, a 6mm blue faceted glass bead, a gold spacer and a blue glass bead in sequence to the right wire, then thread the wire through the 3^rd and 4^th gold spacer that you just added;

2^nd, thread the wire through another gold spacer and then thread through the first gold spacer bead on the string and tighten;

3^rd, thread the other wire through the gold spacers to the next stop as shown, then thread 4 gold spacers, a blue glass bead, a gold spacer and a blue glass bead again, then repeat the steps in above procedures to make the rest cross patterns.

Step 3: Add blue glass bead fringe ornaments

1^st, thread the wire through the beads to the 2^nd gold spacer on the cross pattern, then add a blue glass bead on the wire;

2^nd, thread the wire through the top gold spacer on the next clover pattern, add a blue glass bead again and tighten;

3^rd, thread the wire through the 2^nd gold spacer on the next cross pattern, then add a blue glass bead and tighten;

4^th, repeat above procedures to add rest blue glass bead ornament in sequence and finally trim off the extra wires.  

Step 4: Finish the glass beaded cross earrings

1^st, attach a jump ring by threading it through the gold spacer on the top, then hook a silver earring hook with a plier;

2^nd, repeat the whole process to make the other earing to make a set.

Show you the final look of my glass beaded cross earrings:

Do you love this beaded cross design? This pair of glass beaded earrings can be worn in any occasions. Of course you can use other color matching in making them. Have a pleasant try if you love them!

Beebeecraft Tutorials on Making a Pair of Sweet Earrings

This Beebeecraft tutorial will show you some special tips about how to make a pair of sweet earrings. Small and cute earrings are extraordinarily suitable for summer, and they are suitable for girls. As you known, pink gemstone beads is popular for making jewelry, especially earrings. This is because the gemstone beads are very textured and glamorous. Pink gemstone beads extremely make you shiny and playful.

Via making your own gemstone beaded earrings, you can create items that actually accord to your personal preference and add sparkles to any outfit as much as you’d rather to. Once you master the skills for major craft jewelry ideas, you can make them easily at home. What’s more, you can also wear them, give to friends as special gifts or even sell them.

Jewelry craft supplies needed to make the sweet earrings:

10mm Jade Beads

2mm Glass seed beads

18mm Iron Sliver Earring Hooks

0.2mm Thread Nylon Wire

4~10mm Brass Jump Rings

Flat Nose Pliers

Cutting Pliers

How to Make the Sweet Earrings:

Step1: Secure beads in a wire

1st, slide a pink gemstone beads and a white seed bead in turn, and their number both three eventually;

2nd, slide three seeds bead between the two glass beads.

Step2: Finished the sweet earrings.

1st, slide a white seed bead between the pink beads;

2nd, connect the jump ring in a seed bead which is placed in the middle of the seed beads;

3rd, attach an earring hook to the jump ring.

The final look of the sweet earrings:

Wow! How beautiful and cute earrings. These tips are easily to learn and just spend your little time. Fellow the steps above and you can easily have a pair of sweet earrings made by yourself.

Beebeecraft Tips on How to Make a Pair of Bridal Chandelier Earrings with Pearl and Glass Beads

This is a bridal jewelry DIY project on making a pair of bridal pearl chandelier earrings. The detailed steps are listed below.

Are you searching for handmade bridal jewelry ideas? My tutorial is exactly what you want! With pearl beads and glass beads, I made a pair of elegant bridal chandelier earrings, which is a good choice for brides to wear on wedding day. Now follow my tutorial to see how to make the pearl drop earrings for wedding.

Supplies in making the pearl chandelier earrings with glass drop:

10mm White Glass Pearl Beads

6mm White  Glass Pearl Beads

4mm White Glass Pearl Beads

15x10mm Pearl Drop Beads

15x10mm Glass Drop Beads

8mm Transparent Glass Beads

3mm Gold Beads Spacers

2mm Yellow Bugle Beads

0.38mm Tiger Wire

Brass Rhinestone Beads Spacers

Tibetan Bead Cap

Gold Earring Hooks

Jewelry Tool Supplies

Step 1：Make the starting part of the chandelier earring

1^st, snip off a piece of tiger wire (about 50cm), then fold it in halves and tie a knot to the gold earring hook and tighten;

2^nd, separate the 2 wires by sliding 7 2mm yellow bugle beads on each, and them cross the wires through a 10mm white pearl bead;

3^rd, slide 6 gold bead spacers to one wire, and thread the wire through the 10mm white pearl bead again and tighten up.

Step 2: Make the main part of the chandelier earring

1^st, slide a 15x10mm white pearl drop bead, a 2mm yellow bugle bead, a 4mm white pearl bead, a 2mm yellow bugle bead and a white pearl drop bead again in order;

2^nd, cross and tie the wire to the joint between the 2^nd and the 3^rd gold spacers as shown;

3^rd, slide a 2mm yellow bugle bead, a 4mm white pearl bead, a 2mm yellow bugle bead and a white pearl drop bead again, then cross and tie the wire to the joint between the 3^rd and 4^th gold spacer;

4^th, repeat above pattern and finish the main part of the chandelier earring.

Step 3: Add out layer pearl ornaments

1^st, thread the wire along the way to the 2^nd yellow bugle bead on the left;

2^nd, slide 2 2mm yellow bugle beads, a 6mm white pearl bead and 2 2mm bugle beads on the wire, and thread the wire through the next bugle bead on the primary layer and tighten;

3^rd, thread the wire upward through along the drop pearl bead, the gold spacer and the next drop pearl bead again and then down to the bugle bead on the left;

4^th, slide 2 2mm bugle beads, a 6mm white pearl and 2 yellow bugle beads again, and thread the wire through the next yellow bugle bead on the inner layer;

5^th, repeat above beading pattern as for the right part, and finish the outer layer pearl ornaments.

Step 4: Add a glass drop for the chandelier earring

1^st, when you finish the step 3, the wires are separated through the 2^nd and 3^rd pearl bead, then slide 9 yellow bugle beads to each wire, and cross both wires through a gold bead spacer;

2^nd, add a 6mm white pearl, a brass rhinestone spacer, a gold Tibetan bead cap, a 8mm glass bead, a gold spacer, a 15x10mm glass drop bead and finally a yellow bugle bead respectively;

3^rd, tighten up the wire and trim off it to finish the pearl chandelier earring with glass drop.

Time for the final look! They are extremely elegant!

I finish this pair of bridal chandelier earrings within half an hour and I believe that you can also finish them in a short time by following the steps I listed. If you happen to be a bride-to-be, or if you have friend who is a bride-to-be, then it is highly suggested to make this pair as gift for yourself or your friends!

Beebeecraft Tips on Making a Gold Foot Chain and Anklet with Toe Ring

This is an easy DIY project on making a gold foot chain and anklet with toe ring. It is a good choice for green hands to try!

With aluminum wire and chains available, I can make many easy crafts at home. Today I bring another easy handmade craft to you! This is a foot chain and anklet with toe ring, which is so simple that only took me 10 minutes! Now follow me to see how to make it.

Jewelry craft supplies in making the gold foot chain and anklet with toe ring:

12mm Orange Jade Beads

12mm Green Jade Beads

2mm Gold Aluminum Wire

Gold Jewelry Making Chain

Gold Jump Rings

Brass Rhinestone Beads 

Gold Headpin

Gold Magnetic Clasps

Long Nose Pliers

Side Cutting Pliers

Round Nose Pliers

Scissors

Instructions on making the gold foot chain and anklet with toe ring:

Step 1: Make a gold chain anklet

1^st, snip off 2 pieces of gold twisted chain (about 15cm), attach a jump ring to each end of the 2 chains and then connect them with a gold jump ring;

2^nd, connect the other ends with a gold lobster clasp.

Step 2: Add beads ornaments

1^st, snip off 3 pieces of short gold chain(about 3cm) and attach them to the jump ring one by one;

2^nd, prepare 3 gold headpin, and thread a heart bead to one of them, and thread a green jade bead, a rhinestone spacer to another headpin, and at last, thread an orange jade bead and a rhinestone spacer to the third headpin;

3^rd, make hoops at the ends of the headpin;

4^th, hook them to the end of the short chain respectively.  

Step 3: Twist a toe ring

1^st, snip off a piece of gold aluminum wire (about 20cm) and firstly twist snail loop;

2^nd, wrap the aluminum wire around your toe (or your finger) as shown;

3^rd, make a small snail tail in the end;

4^th, snip off a piece of gold chain (about 30cm) and attach the toe ring to the chain with a jump ring.

This is the final piece of the gold foot chain and anklet with toe ring!

After reading my tutorial, I believe you will agree that this handmade foot chain craft is easy to try. Gold chains and gold aluminum wires are commonly used in jewelry making, and they can develop many jewelry crafts. This DIY foot chain and anklet is really easy among them. Why not get a try?

Beebeecraft Tutorials on How to Make a Wire Wrapped Multi Colored Statement Necklace

In this article, I will show you an easy wire wrapped necklace tutorial on a multi colored statement necklace.

Aluminum wires are really widely used in jewelry making. With just aluminum wires available, you can still make many great jewelry designs. Today I took some 1.5mm colorful aluminum wires, and make this charming wire wrapped statement necklace. You will find it simple after reading my tutorial below.

Craft for jewelry making the colorful wire wrapped statement necklace:

1.5mm Colorful Jewelry String

Jewelry Tool Supplies

Side Cutting Pliers

Round Nose Pliers

Long Nose Pliers

Instructions on making the colorful wire wrapped statement necklace:

Step 1: Make a basic aluminum wire circle

1^st, Snip off a short gold aluminum wire(about   cm), and fold in halves;

2^nd, leave a circle and bride them and make a crock at the end.

Step 2: Make colorful wire wrapped ornaments

1^st, snip off several pieces of colorful aluminum wires and wrap and roll each of them into snail circles as pictured;

2^nd, wrap and tie each to the gold ring and tighten;

3^rd, add the colorful wire wrapped ornaments one by one and finish the statement necklace.

This colorful wire wrapped statement necklace is finished within 15 minutes!

I just turned 1.5mm colorful aluminum wires into fashionable statement necklace! Fellow this Beebeecraft Tutorials about how to make wire wrapped statement necklace, you do not need any skills, just follow my steps and make your own designs as you like! Have a nice try!

Beebeecraft Tutorials on How to Make a Pair of Pearl Ball Drop Earrings for Brides

In this Beebeecraft tutorial, you will learn an easy way to make a pair of pearl ball drop earrings for brides. Follow the steps bellow to have a try.

There are hundreds of pearl earrings designs on our website. Today’s DIY earrings project is about a pair of easy pearl ball drop earrings for brides. As you can see from the picture, I only used white and yellow pearl beads to make the main body of the earrings with simple design. Below is the tutorial for you.

Jewelry making supplies in making the bridal pearl ball drop earrings:

10mm White Glass Pearl Beads

8mm White Glass Pearl Beads

4mm Yellow Glass Pearl Beads

0.38mm Jewelry String

Earring Hooks

Silver Headpin

Scissors

Side Cutting Pliers

Instructions on making the easy pearl ball drop earrings for brides:

Step 1: Bead a basic pattern

1^st, snip off a short tiger wire (about 25cm) and slide 2 10mm white pearl beads and 2 8mm pearl beads alternatively;

2^nd, cross one end through the 10mm white pearl bead as pictured;

3^rd, slide a 8mm white pearl bead through each end, and then cross them through another 10mm white pearl bead and tighten;

4^th, repeat the above procedure to bead one more square pattern.

Step 2: Make the beaded ball

1^st, slide a 8mm white pearl bead to each wire, and then cross the wires through the first 10mm white pearl bead in the starting point as shown in the picture and tighten up;

2^nd, slide a 4mm yellow pearl bead through each end, and then thread the wire along to the 10mm pearl bead, and add a 4mm yellow pearl bead to each end, thread its way again;

3^rd, repeat the process and finish the ball like bellow (shown in the picture).

Step 3: Finish the pearl ball dangle earrings

1^st, pick an iron headpin, thread 2 4mm yellow beads, a 8mm white pearl bead to the headpin, and then insert the headpin through the pearl ball;

2^nd, add a 8mm white pearl bead, a 4mm yellow bead to the headpin and make a loop in the end.

3^rd, attach earring hook and finish the pearl ball drop earrings.

I wear them immediately after I finish this pair of pearl ball drop earrings! They are beautiful, aren’t they?

If you have friend that is a bride-to-be, then this pair of bridal pearl ball drop earrings is a great choice to of gift for friend! Save this Beebeecraft tutorial and try to make one pair, since it is not difficult to make them, and you can finish them within half an hour by following my tutorial!

Beebeecraft Tutorials on How to Make Cluster Earrings with Purple Seed Beads and White Pearls

This is an easy DIY project on making a pair of cluster earrings with seed beads and pearls. Below are the 2 steps you need to follow.

Cluster earrings are very charming because of the multiple dangles which make them dynamic. In fact, cluster earrings are usually easy to make. Even a green hand can finish it within 10 minutes! Get a fresh try and make your own earrings now!

Supplies in making the beaded cluster earrings：

3mm Purple Glass Pearl Beads

6mm White Glass Pearl Beads

0.3mm Copper Wire

Silver Earring Hooks

Jewelry Tool Supplies 

Scissors

Instructions on making the beaded cluster earrings:

Step 1: Make beaded dangles

1^st, snip off several pieces of 0.3mm coper wires, (about 20cm long) and then slide a purple seed bead to the middle of each wire;

2^nd, slide a 6mm white pearl bead and 11 3mm purple glass pearl beads to both wires to make a beaded dangle. Repeat this procedure on the rest wires until you have finished 10 dangles.

Step 2:  Finish the beaded cluster earrings

1^st, pick 2 wires among the dangles, and wrap and tighten the wire to concentrate and fix the dangles;

2^nd, tie the wires to the silver earring hook and finish the beaded cluster earrings.

Here is the final look of the easy beaded cluster earrings with purple seed beads and white pearls.

This Easy DIY project on a pair of cluster earrings with purple seed beads and white pearl beads is a very good choice for beginners to try. As you can see, the supplies are really simple and the steps are easy. You need no skills to make them. If you love them, just have a try!