Beebeecraft Tutorials on How to Make a 2-Strand Necklace with Purple Stone Pendant and Flower Dangle Pendant

Do you wanna make stone pendant necklace? Here I will show a 2-strand necklace with gemstone pendant and flower dangle pendant to you guys, hope you’ll like it~

There are 2 layers in this purple stone pendant necklace, one is short and the other one is a little long, and I wear the suede cord necklace with a tattoo choker necklace which was made before, how do you think them? If you also love the DIY drop pendant  necklace, follow me to have a nice try!

Jewelry craft supplies for making the purple stone pendant necklace:

Flower Enamel Dangle Jewelry Findings

Black Faux Suede Leather Cord

Bullet Synthetic Gemstone Pendants

Silver Jump Rings

Silver Magnetic Clasps

Silver Ribbon Crimp Ends

Needle Nose Pliers

Instructions on how to make pendant necklaces:

Step 1: Add pendant to the suede cord

1^st, cut 2 pieces of black suede cord, one is short and the other one is a little long;

2^nd, add a flower dangle pendant to the short suede cord and add a purple stone bullet pendant to the long suede cord.

Step 2: Finish the black suede cord necklace

1^st, put the 2-strand necklace together and add a crimp end to both ends of the necklace;

2^nd, add a jump ring to one end of the necklace while add a jump ring and a spring ring clasp to the other end of it as pictured.

Here is the finale look of the purple stone pendant necklace.

I put the tattoo choker necklace with this 2-strand necklace together, and I love combination so much, how do you think of it? It is so easy to make them that you can make them with a quite short time! Why not have a try now?

This project is inspired from Beebeecraft.

Beebeecraft Tips on How to Make Cool Black Leather Cord Bracelet for Men

 In this article, I will show a DIY project for Valentines’ Day gift – how to make black leather cord bracelets for men. Have a nice check!   

Are you seeking for Valentine’s Day gift ideas? Today I will show you an easy DIY leather cord bracelet for your boyfriend! The cool design will make him happy. Let’s see the details here.

Jewelry craft supplies for making the cool black leather cord bracelets for men:

4mm Black Leather Cord 

Brass Folding Cord Ends

Iron Jump Rings

0.5mm Copper Wire

Iron Ending Clasp

Tibetan Silver Round Beads

Tibetan Silver Tube Beads

Iron Lobster Clasp

Jewelry Tool Supplies

Scissors

Round Nose Plier

Long Nose Plier

Side Cutting Plier

Instructions on making the black leather cord bracelet for men:

Step 1: Make the first leather cord bracelet

1^st, cut a piece of 4mm black leather cord (about 15cm), attach a brass folding cord end to each end of the leather cord respectively;

2^nd, snip off 2 pieces of short 0.5mm copper wire, then tie and wrap the wires around the folding cord end as shown;

3^rd, connect the cord ending clasp with 2 jump rings and a tibetan tube bead as shown;

4^th, attach a cord ending clasp to the other ends of the leather cord respectively, then connect them with jump rings and a lobster clasp.

Step 2: Make the second leather cord bracelet

1^st, cut a piece of 35cm black leather cord, slide a tibetan silver round bead to the middle of it, then tie a knot;

2^nd, slide a another tibetan silver bead to the other side of the knot;

3^rd, attach a ending clasp to each end of the leather cord;

4^th, connect the leather cord bracelet with jump rings and a lobster clasp.

Allow me to show you the final look of the black leather bracelets for men!

This cool black leather cord bracelet is done within 15 minutes! Great trial, isn’t it? With simple supplies, this bracelet is cost-efficient for those who are on budget. Beside, you can adopt other beads you like on the cord, it is up to you! Will you try?

Beebeecraft Tutorials on How to Make a Pair of Glass Beaded Square Drop Earrings

Today I going to show you how to make a pair of glass beaded square drop earrings. The detailed steps are listed below.

Bugle beads are frequently used in jewelry making, and they are popular because of their shaping functions. Today I chose black bugle bead, purple and transparent glass beads and gemstone bead to make this pair of glass beaded square drop earrings. Follow me to see how.

Jewelry craft supplies in making the glass beaded square drop earrings:

6mm Purple Faceted Crystal Glass Beads

4mm Transparent Crystal Glass Beads

12mm Red Gemstone Beads

25mm Black Bugle Beads

2mm Red Glass Seed Beads

Silver Earring Hooks

Iron Headpins

10x15mm Black Glass Drop Beads

0.3mm Tiger Wire

Scissors

Round Nose Plier

Instructions on making the glass beaded square drop earrings:

Step 1: Make a square pattern

1^st, cut a piece of 0.3mm tiger wire (about 70cm), thread it through 4 25mm black bugle beads and 3 4mm transparent glass beads alternatively, and then cross the wires through a 4mm transparent glass bead and tighten;

2^nd, thread each wire through a black bugle bead and the transparent bead at the corner, then repeat this until you finish the second square pattern and tighten the wire.

Step 2: Add the last layer and transparent bead ornaments

1^st, thread each wire through 2 4mm transparent glass beads and then thread through the black bugle bead respectively;

2^nd, thread the wire through 2 transparent glass beads again respectively and then thread through the black bugle bead, finally tighten the wire.

Step 3: Add ornaments in the center of the square pattern

1^st, combine the 2 wires, thread then through a 4mm transparent glass bead, then separate them by threading each wire through a 6mm purple glass bead and tighten up;

2^nd, thread each wire through 3 purple bead and 3 red glass seed beads alternatively, and finally cross them through a purple glass bead and tighten up;

3^rd, combine both wires and thread them through a 4mm transparent glass bead, then separate the wires by crossing them through the transparent glass bead in the corner of the square pattern and trim off the wire.

Step 4: Add a black glass drop dangle

1^st, thread the headpin through a black glass drop bead, then twist a little loop in the end of the headpin;

2^nd, hook the dangle to the bottom of the square pattern, then attach an earring hook on the top as shown.

Step 5: Add a bud for the purple glass ornament

1^st, cut a short piece of tiger wire, then thread it through the 6mm purple glass bead;

2^nd, thread both wires through a 12mm red gemstone bead, then cross the wires through the purple glass bead under it;

3^rd, thread along the wires to make sure the bud is fixed and trim off the excessive wires in the end.

Time for the final look of this pair of beaded square drop earrings!

This pair of glass beaded square drop earrings has simple design, but unique personality. The colors red and black match perfectly, and the glass bead add bling element to highlight the charms. It’s not difficult to make this pair of earrings, so have a try!

Beebeecraft Tips on How to Make Large Hoop Earrings with Silver and Gold Beaded Tassels

In this article, you will see a detailed instruction on making a pair of large hoop earrings with silver and gold beaded tassels.

With seed beads and glass bicone beads available, you can actually try this pair of large hoop earrings with silver and gold beaded tassels. The steps are really easy and you can make them out within 20 minutes even for green hands. Now let’s check the steps together.

Jewelry craft supplies in making hoop earrings

6mm Gold Crystal Glass Beads

2mm Silver Glass Seed Beads

2mm Silver Glass Bugle Beads

0.3mm finished jewelry String

Earring Hooks

Jewelry Tool Supplies 

Scissors

Instructions on making the large hoop earrings with silver and gold tassels:

Step 1: Bead 2 ring patterns

1^st, cut a piece of 75cm tiger wire, thread it through 2 2mm bugle seed beads, a gold bicone glass beads, 10 2mm silver bugle seed beads, a gold glass bead and 2 silver bugle beads in sequence;

2^nd, cross both ends of the wire through a 2mm silver bugle bead and tighten up;

3^rd, thread each wire through a gold glass beads, 3 silver bugle beads, a gold glass bead, 3 silver bugle beads one by one, then cross both wires through a gold glass bead and tighten.

Step 2: Add tassel adornments

1^st, thread the wires through along the beads to the 2^nd silver bugle bead respectively as pictured;

2^nd, thread one wire through 4 2mm silver bugle beads, a gold glass bicone bead and a 2mm silver seed bead in sequence, then thread the wire backwards through the beads until the 3^rd bugle bead on the 2^nd ring pattern;

3^rd, thread the wire through 5 bugle seed beads, a gold glass bicone bead and a silver seed bead, then thread it backward through the beads until the next bugle bead on the ring pattern as shown;

4^th, repeat this beading pattern and do remember to add a bugle seed bead in every tassel adornment.

Step 3: Finish the large hoop earrings with beaded tassels

Attach the earring hook to the top of the ring patter, and then continue with the other earring to make a set.

This is the final look of this the hoop earrings with beaded tassels.

There are many handmade earrings designs on this site and they vary from easy to difficult. If you decide to make a pair of earrings, then you can go to the referral and pick the best design and have a try. Hundreds of earrings designs are waiting for you!

Beebeecraft Tips on How to Make a Pink Leather Bracelet with Glass Beaded Ball Ornaments

Do you love leather bracelet? Today’s DIY project from Beebeecraft is about making a pink leather bracelet with glass beaded ball ornaments for girls. Hope you admire it!

Leather bracelets are cool and stylish with different ornaments on. Today I’m going to show you how to make a pink leather bracelet for girls. If you want to make some easy and personalized bracelets to wear, and then check this one, it won’t let you down!

Jewelry craft supplies in making the pink leather bracelet with glass beaded ball ornaments:

6mm Pink Crystal Glass Beads 

4mm Silver Round Jewelry Bead Spacers 

Pink Leather Cord

Brass Bolt Spring Ring Clasp

Cord Ending Clasp

Silver Iron Jump Rings 

Lobster Clasp

0.3mm Tiger Wire

Jewelry Tool Supplies 

Scissors

Long Nose Plier

Instructions on making the pink leather bracelet with glass beaded ball ornaments:

Step 1:  Bead the basic unit pattern

1^st, cut a piece of 0.3mm tiger wire (about 30cm), thread the wire through a pink glass bead, a silver bead spacer and a pink glass bead;

2^nd, cross both ends of the wire through a bead spacer and tighten;

3^rd, thread each wire through a pink glass bead and cross them through a bead spacer and tighten;

4^th, you’ve beaded 2 basic unit patterns so far.

Step 2: Finish the pink glass beaded ball

1^st, follow the procedures in step 1 and bead one more basic unit;

2^nd, thread each wire through a pink glass bead, then cross then through the first bead spacer on the first pattern and trim off the wire;

3^rd, make 2 more pink glass beaded balls in the same way.

Step 3: Add ornaments on the pink leather cord

1^st, cut 2 pieces of 25cm pink leather cord and thread both leather cords through 3 pink glass beaded balls;

2^nd, pick 10 silver tibetan bead spacers and thread them through the leather cord in sequence as pictured.

Step 4: Finish the pink leather cord bracelet

1^st, prepare an ending clasp, 2 cord ending clasps and 2 iron jump rings;

2^nd, attach the cord ending clasps on the ends of the leather cord, and then connect the ends with jump rings and spring ring clasp.

Here is the final look of this pink leather cord bracelet with glass beaded ball ornaments.

The pink glass beaded ball ornaments on this leather bracelet add charms to show off. Also you can make the glass beaded ball a pendent for a leather necklace to make a set! Worth a try!

Beebeecraft Tutorials on How to Make a Glass Stranded Necklace with Butterfly and Beaded Long Pendant

Do you love long glass stranded necklace? In this article, Beebeecraft tutorial will show you a glass necklace with butterfly and long pendant design.

Today I made a long pendent necklace with glass beads, pearl beads and gold spacers. As you can see from the picture, I added a butterfly link to hang the long beaded pendent. It seems that this necklace is difficult to make, while if you follow my instructions to try, it would be easy.

Jewelry craft supplies in making the glass stranded necklace  6mm Green Faceted Glass Beads

8mm Transparent Faceted Glass Beads

3mm Gold Jewelry Bead Spacers

8mm White Glass Pearl Beads

4mm White Glass Pearl Beads

10mm White Glass Pearl Beads

2mm Gold Brass Seed Beads

Iron Jump Rings

Iron Eye Pins

Iron Headpins

0.3mm Tiger Wire

Iron Bead Tips

Jewelry Tool Supplies

Tibetan Gold Butterfly Link

Round Nose Pliers 

Side Cutting Pliers 

Scissors

Instructions on making the glass stranded necklace with butterfly and beaded long pendent:

Step 1: Bead the necklace strand

1^st, snip off a piece of 0.3mm tiger wire (about 100cm), fold it into halves and attach a clasp on the middle;

2^nd, thread one wire through a 2mm gold seed bead and a 6mm green faceted glass bead while the other wire through a gold seed bead and a 4mm white pearl bead, then cross the wires through a 3mm gold bead spacer and tighten;

3^rd, thread a gold seed bead, a 4mm white pearl through the lower wire in the picture, thread a seed bead and a 6mm green glass bead through the other wire, and then cross both wires through a 3mm gold bead spacer and tighten; (You’ve beaded the basic necklace strand pattern so far)

4^th, repeat above procedures to make more patterns and stop when you reach a proper length;

5^th, cross the wires and attach a bead tip on, and trim off the excessive wires.

Step 2: Add the gold butterfly link

1^st, prepare 2 eyepins, 2 8mm white pearl beads, and 4 gold seed beads;

2^nd, thread each wire through a gold seed bead, a 8mm white pearl beads and a gold seed bead in sequence respectively;

3^rd, cut the excess headpins, and twist a hoop on each each of the eyepins;

4^th, attach a jump ring to each side of the butterfly link, and then connect it to the bead tips on each end of the necklace strand.

Step 3: Add long beaded pendant

1^st, prepare 3 iron headpins and 7 iron eyepins;

2^nd, thread each headpin through a 10mm white pearl bead and 2 8mm transparent glass beads;

3^rd, thread each eyepin through a 6mm green glass bead, a 8mm white pearl bead and a green glass bead in sequence respectively;

4^th, connect the dangles as shown in the picture and finish the necklace.

I’m quite satisfied with this glass necklace with butterfly and long beaded pendant design! It works out so charming!

Have you been attracted by this charming long pendent necklace? Glass beads and pearl beads usually match perfectly in jewelry making. Of course, you can change the green glass beads into other colors if you like. Have a good try fellow the Beebeecraft tutorial ! 　

Beebeecraft Tutorials on How to Make a Large Pendant Necklace with Pearl and Glass Beads

This beaded large pendent necklace is a little complex to make. Now check the detailed steps below to find out how to make it.

There are many beaded pendent necklace designs on this site, but today I will introduce you another complex pendent necklace. As you can see from the picture, the most important part is the pendent. It is made of several kinds of beads and I use the yellow bugle seed beads and blue seed beads to add charms. Let’s see how to make this beaded large pendent necklace with pearl and glass beads.

Supplies needed in making the beaded large pendent necklace:

6MM White Glass Pearl Beads

12MM Yellow Glass Pearl Beads

6MM Transparent Faceted Glass Beads

8MM Black Glass Beads

6MM Black Gemstone Beads

3MM Blue Glass Seed Beads

2MM Yellow Bugle Seed Beads

Black Glass Drop Bead

0.45mm Tiger Wire

Iron Jump Rings

Jewelry Tool Supplies

Lobster Clasp

Iron Headpin

Long Nose Plier

Round Nose Plier

Scissors

Instructions on making the beaded large pendent necklace:

Step 1: Bead a large hoop

1^st, snip off a piece of 0.45mm tiger wire (about 100cm), then thread one end of the wire through a 8mm black glass bead, a 6mm transparent faceted glass bead, a 8mm black glass bead and 2 6mm white pearl beads in sequence;

2^nd, thread the other end of the wire through the first black glass bead and tighten;

3^rd, add a 6mm transparent glass bead to the left wire, and 2 6mm white pearl beads plus a 8mm black glass bead to the right wire respectively;

4^th, thread the left wire through the black glass bead on the right wire and tighten;

5^th, repeat above beading pattern and finish the whole beaded hoop in the end.

Step 2: String blue seed beads ornaments

1^st, reserve one wire, then thread the other wire through the black glass bead and white pearl bead as shown;

2^nd, thread the wire though a blue seed bead, then the white pearl bead, then add a blue seed bead again, repeat this way and string the blue seed beads ornament as pictured.

Step 3: Add yellow bugle beads embellishment

1^st, thread the other wire through the black glass bead, then thread it through 8 2mm bugle beads through the wire;

2^nd, thread the wire through the next black glass bead from the inner side to the outer side;

3^rd, thread 8 yellow bugle seed beads to the wire again, then thread the wire trough the next black glass bead;

4^th, string yellow bugle seed beads and do the same thing as the above 4 steps and finally it will end up like this.

Step 4: Finish the large beaded pendent

1^st, prepare 2 iron headpins, and thread a black glass drop bead and a 12mm yellow pearl bead through them respectively;

2^nd, make loops at the ends of the headpins, then attach the yellow pearl dangle to the joint between the transparent faceted glass beads and make it the center of the pendent;

3^rd, hook the black glass drop bead to the pendent.

Step 5: Bead a black and white necklace strand

1^st, snip off a piece of 0.45mm tiger wire (about 50cm), thread it through 3 6mm white pearl beads and a black gemstone bead;

2^nd, thread the right wire through the first pearl bead and tighten;

3^rd, thread 2 white pearl beads to the left wire and a black gemstone bead to the right wire, then thread the right wire through the last pearl bead you just added;

4^th, repeat this beading pattern and finish the black and white necklace strand and trim off the extra wire.

Step 6: Add yellow bugle beaded patterns  

1^st, snip off a piece of 35cm tiger wire, mark the 1/4 of the whole strand, then thread the wire through the 6mm white pearl bead,

2^nd, then thread each end through 5 yellow bugle seed beads, and cross them through the next pearl bead as pictured;

3^rd, add the bugle cross ornament on the rest strand, and stop at the another symmetric point and finally trim off the extra wire.

Step 7: Finish the whole beaded large pendent necklace

1^st, snip off a piece of short tiger wire, and then thread it through a blue seed bead;

2^nd, thread each side of the wire through the black gemstone bead respectively;

3^rd, thread the wire through the beads and tie to the joint;

4^th, attach jump ring to each end of the necklace strand, and connect them with a lobster clasp.

With time and efforts, I made this beaded large pendent necklace!!

This beaded necklace with pendant requires some beading skills and basic stringing skills to make. If you are interest in this large pendent necklace design, you can try yourself to make one by following my tutorial. Besides, if you come across any problems when making this beaded pendent necklace, just feel free to contact us.